PerMix Paddle Mixer

The PerMix Paddle Mixers consist of one electrical motor, one reduction gear, coupling, and shaft with an agitation that has paddle liked shaped attachments that collide with ingredients causing a multi-directional response that mixes products quickly.

The shaft is sealed with bush & PTFE gland housing at both ends, with other options available. Materials are loaded from top side, and the discharge is located at the bottom side in the center or end, depending on production needs, either batch type or continuous.

The discharge height can be adjusted as per requirement so that material gets discharged into the container below it without floating dust.

PerMix Paddle Mixers consists of one electrical motor, one gearbox, and a shaft with plows located in a O-shaped vessel. The plows are designed in such a way that the powder materials are guided to move from the two ends of vessel to the center, and meanwhile from center to both ends, and over, until batch is mixed thoroughly, in addition

Paddle Mixers also lift the ingredients into the air, mixingthem in a “fluidized zone” then allow them to drop back down. In such a three-dimensional way, the total powder can be mixed fast in the vessel. It asks for a short mixing time and relatively low power consumption.  For out twin shaft Paddle Mixers that have twin shafts and paddle sets, there is an option for dual drives.  Our Twin Shaft Paddle Mixers are also referred to as Fluidized Bed Mixers.

The PerMix Horizontal Paddle Mixer / Dryers have the same mixing principle as our Horizontal PaddleMixers but add the ability to add an external jacket that allows for heating & cooling of products inside the mixer while mixing.

The heating & cooling allows for precision control in temperatures and aids in the drying process.  It can also be used to control chemical reactions that may take place during mixing.  In addition to adding a jacket, the Paddle Mixer / Dryers can also be equipped with internal vacuum.  Theses features all allow the PerMix Paddle Mixer / Dryers to remain versatile & efficient mixing solutions.

The PerMix Hybrid Paddle Mixer / Dryers have the same mixing principle as our Horizontal PaddleMixers & PaddleMixer / Dryers but add the ability for the operator to change agitation type with ease, switching from paddle to plow, or even segmented ribbon.

Our Twin Shaft Paddle Mixers / Fluidized Zone Mixers are ideal for mixing ingredients of different density & particle size as the twin paddle design “flings” the ingredients in the air with such velocity the mixingis done in the air, in a gravity-free zone where density & size do not matter.

PerMix Vertical Paddle Mixers compliment to continued development of PerMix’s Vertical Mixers and has all the features of our Horizontal PaddleMixers but add the advantages of our other Vertical Mixersand have reduced footprint and a more versatile batch range as there is no minimum batch size.

Like our other Vertical Mixers, the Vertical Paddle Mixers also leave little to no residue after discharge.

Paddle Mixer Powder Mixing Configurations:
Food flavoring/additives, Sponge/cake mixes, Cosmetics, Pharmaceuticals, Cement, Powdered rubber.
Paddle Mixer Paste Mixing Configurations:
Biscuit creams, dough, PVC pastes, Car body fillers/putties, Sugar/marzipan paste, Toiletry pastes, Tile adhesives and grouts.
Paddle Mixer Mixing Of Wet Slurries:
Filter cake re-slurrying, dough, Fiberglass resin dough putty. Wet granulation, liquid coating of powders and granules, fat and oil incorporation, vacuum drying, hot air drying.

For the latest info on customers, applications, & global installations, visit our blog or visit us on LinkedIn PerMix Paddle Mixer Options.

1. Paddle Design:
   We offer several types of paddle designs for different sizes and applications.
2. Construction Material & Sanitary Finishes:
   We are able to offer our Paddle Mixers with contact part to be built in Carbon steel, SS304, SS316/316L, Titanium, Duplex stainless steel, Hastelloy, etc. Standard of internal and external finish can be adopted to the customer’s needs. For abrasive materials we offer hardened steel as the contact part. Multiple types of finishes are available also, including sanitary type & even electro-polishing with proof of passivation.
3. Feeding & Discharge Options:
   Paddle Mixers can have a variety of feeding & discharging methods that match the demands of the filling & production line.
4. Drive Systems:
   Paddle Mixers have a drive system by geared motor, cycloidal reducer, worm reducer, belt or chain transmission, etc.
5.  Heating & Cooling Jackets:
   Paddle Mixers are available with jackets for heating / cooling operation, including ASME, ATEX, & CRN certified jackets.
6. Vacuum Drying & Deaeration:
   Paddle Mixers can be designed for vacuum drying & deaerating or for inner pressure working for special applications.
7. Paddle Mixer Spray Nozzles:
   Liquid can be added into the powder by spray nozzles in any of our Ribbon Mixers
8. Custom Engineered Dimensions:
   Dimensions of our Plow Mixers can be defined according to customer’s requirements.
9. Paddle Mixer Sizes:
   Paddle Mixers from 1 to 30000 lit. total volume with bigger size as per request.

1. High level of accuracy with minor component ratio to be 1:100,000
2. The ability to choose gentle or aggressive mixing styles
3. The ability to add heating / cooling, with or without vacuum
4. Quick & efficient mixing of either batch or continuous mixing under dry or wet mixing
5. Easy to clean in either dry or wet applications
6. High heat transfer rate, ideal for heating or cooling process of the powders
7. Chopper can be installed for intensive mixing and lump breaking
8. The ability to change agitation styles in our Hybrid Paddle Mixers
9. Vertical Paddle Mixers offer the same advantages however have more diversity as there in no minimum batch size
10. Vertical Paddle Mixers also have little to no residue left after discharge
11. Vertical Paddle Mixers reduce footprint, saving processing / production line size.